Specialty Phases SPE

InertSep GC cartridges are packed with graphite carbon in planar structure. They are generally used for removal of pigments from crop homogenates. In conjunction with other various normal phase sorbents and ion exchange sorbents, these cartridges are able to be used for a wide variety of applications as a cleanup sorbent. Specifications B...

InertSep GC-e cartridges are packed with graphite carbon which has similar physical properties to InertSep GC. InerSep GC-e provides the same extraction performance as InertSep GC at low cost. Specifications Base Gel: Graphite Carbon Average Particle Size: 100/200 mesh Surface Area: 90 m2/g Pore Volume: 1 mL/g Pore Size: 50 nm

InertSep for AQUA is a SPE cartridge with low background contamination. Without conditioning, it is possible to conduct sample preparation easily and decrease solvent consumption by 50 % in procedure.

These two layer cartridges are packed with graphite carbon for removing pigments and NH2 sorbent for sample cleanup of organic extracts. This consolidation of two layers achieves high sample cleanup performance which cannot be obtained only on one layer.

These two layer cartridges are packed with graphite carbon for removing pigments and PSA sorbent for sample cleanup of organic extracts. This consolidation of two layers achieves high sample cleanup performance which cannot be obtained only on one layer.

InertSep PA is a special SPE modified with polyamide functional groups. Primary interactions are anion exchange and polar exchange. Secondary interactions are non-polar exchange.

InertSep Slim-J DRY cartridge is packed with anhydrous Na2SO4 for dehydration.

InertSep K-solute is packed with diatomaceous earth and ideal even for the sample to form an emulsion during liquid-liquid extraction procedure. Dedicated rack for InertSep makes the operation simple and efficient.

A large number of mycotoxins are contained in natural food products. Among these, Aspergillus flavus is known to produce aflatoxins that are carcinogenic to liver cells. Mycotoxins in food safety have received a great deal of attention in recent years.

InertSep mini AERO series are active samplers for the analysis of Aldehydes and Ketones in outdoor gas, car cabin and exhaust gas in compliance with: Offensive Odor Control Law, Clean Air Act, and EPA. There are four types: AERO DNPH, AERO DNPH-HR, AERO Ozone Scrubber, and AERO SC, InertSep mini AERO series.

InertSep Phospholipid is developed for removal of phospholipids selectively and is able to minimize ion suppression of LC/MS/MS analysis. It can remove more than 90 % of phospholipids.

Kits that combine various products in the InertSep series.

These two-layer cartridges are packed with GC-e graphite carbon for removing pigments and NH2 sorbent for sample cleanup of organic extracts. Due to the cost reduction of GC-e, these two-layer cartridges achieve high sample cleanup performance at low cost.

These two-layer cartridges are packed with GC-e graphite carbon for removing pigments and PSA sorbent for sample cleanup of organic extracts. Due to the cost reduction of GC-e, these two-layer cartridges achieve high sample cleanup performance at low cost.

InertSep GC/PSA/SI is more efficient for removing a wide variety of polar matrix compounds than GC/PSA.

InertSep GC/SAX/PSA are able to be used for cleanup of processed food.

InertSep GC/SAX/PSA/SI is a four layer SPE cartridge. GC has ability for the isolation removal of pigments and SAX, PSA and SI offer superior cleanup when conducting multi-residue pesticide analysis.

InertSep SAX/PSA/SI is a three layer SPE cartridge for cleanup. It is available for sample cleanup to make analysis of residual pesticides.

InertSep Slim-J AC cartridges are packed with active carbon particles uniformly size classified for liquid permeability. As ultra-pure active carbon is employed, it is clear of worry about contamination. Good retentivity of this sorbent even for highly polar compounds ensure high recovery and reproducibility. Luer device format supports a...

InertSep Slim-J AERO SDB400 is a cartridge for collecting semi-volatile organic compounds (SVOC) in the atmosphere. In addition to collecting pesticides and flame retardants in the atmosphere, it is also suitable for collecting naphthalene added to the target components for work environment measurement.

InertSep C18/DRY is a two-layer SPE cartridge and designed for sample preparation for residual pesticide analysis. C18 is to remove lipids and DRY is for dehydration.

Due to the cost reduction of GC-e, this three-layer cartridge achieves high sample cleanup performance at low cost.