Español (Taducido por Google) 
Search
You have no items in your shopping cart.
InertSep®
GL Sciences’ InertSep SPE products contain sorbents and are created using the same advanced silicas and bonding technologies like those used to create Inertsil HPLC packings. Therefore, InertSep SPE cartridges and 96-well plates show exceptional purity, excellent reproducibility, high recoveries/low non-specific binding, low- to non-existent backgrounds from reagents used to manufacture the column housing, and rigid durability over a wide pH range.
SKU# 5010-10032
$176.00
SKU# 5010-10011
$192.00
SKU# 5010-10022
$148.00
SKU# 5010-10001
$104.00
SKU# 5010-10027
$144.00
InertSep C18 is a silica-based sorbent modified with C18 (octadecyl) functional groups being utilized for non-polar interaction. With our high-level end-capping technology, cationic interaction with the silanol groups on the gel is virtually eliminated, which reduces adsorption of basic compounds. This sorbent is suitable for removing lip...
From $155.00
InertSep C18-B is a silica-based sorbent modified with C18 (octadecyl) functional groups being utilized for non-polar interaction. In addition to the interaction, secondary interaction can be expected on this mono functional, general purpose sorbent. Specifications Average Particle Size: 45 µm Carbon Loading: 14 % End-capping: Middle ...
From $155.00
InertSep C18-C is a silica-based sorbent modified with C18 (octadecyl) functional groups being utilized for non-polar interaction. In addition to the general purpose non-polar interaction, secondary interaction between unbonded silanol groups on silica substrate and isolates can be expected on this trifunctional C18. Specifications Aver...
From $155.00
InertSep C8 is a silica-based sorbent modified with C8 (octyl) function groups that offers a weaker non-polar interaction than C18. InertSep C8 is used for isolates that are strongly retained too much on C18. With high-level end-capping, cationic interaction with the silanol groups on silica substrate is virtually eliminated and adsorptio...
From $155.00
InertSep C2 is a silica-based sorbent modified with C2 (ethyl) functional groups being utilized for a weaker non-polar interaction than C8. InertSep C2 is used for isolates that are strongly retained too much on C8. As end-capping is accomplished on this sorbent, cation exchange interaction with none bonded silanol groups is virtually eli...
From $146.00
InertSep CH is a silica-based sorbent modified with cyclohexyl functional groups that gives this sorbent a similar moderate polarity with InertSep C2. InertSep CH offers a unique selectivity for the extraction of certain chemical compounds, compared with C18, C8, C2 and PH. Specifications Average Particle Size: 60 μm Carbon Load: 7.5 %...
From $219.00
InertSep PH is a silica-based sorbent modified with phenyl functional groups having a similar non-polar interaction to C8. Phenyl functional group has π-π bond interaction which allows an isolate molecule bearing benzene ring, such as aromatic compounds to selectively interact with phenyl functional group on the sorbent. Specifications ...
From $155.00
InertSep C18 ENV is a C18 solid phase synthesized for water analysis. It is useful for sample treatment of anion surfactants in water. Specifications Average Particle Size: 60 µm Carbon Loading: 16 % End-Capping：Low-end capped Surface Area: 450 m2/g Pore Volume: 0.7 mL/g Pore Size: 6 nm pH Range: 2 - 8
From $164.00
InertSep CN is a silica-based sorbent modified with cyanopropyl functional groups. Having both non-polar and polar interactions, InertSep CN is ideal for applications in which extremely non-polar isolates would irreversibly retain on more non-polar sorbents such as C18 or C8 and very polar isolates might be retained irreversibly on the mo...
From $219.00
InertSep 2OH is a silica-based sorbent modified with diol functional groups. Being a fairly polar sorbent, InertSep 2OH is typically used for polar extractions from low-polar or non-polar solvents. Specifications • Average Particle Size: 60 μm • Carbon Load: 10 % • Surface Area: 450 m2/g • Pore Volume: 0.7 mL/g • Pore Size: 6 nm...
From $219.00
InertSep SI is a bare silica, which has strong polar interaction. It offers selective separation for similar compounds in structure using low-polar solvents. InertSep SI is regarded as the most polar sorbent available. Care should be taken with humidity and polar solvents, when using this material. Specifications • Average Particle ...
From $164.00
InertSep AL-A is packed with alumina (Al2O3). Available in Al2O3 acidic format. Specifications • Average Particle Size: 100 µm • Surface Area: 130 m2/g • Pore Volume: 0.3 mL/g • Pore Size: 8 nm • pH Range: 3.5 - 5.0（acid）
From $182.00
InertSep AL-B is packed with alumina (Al2O3). Available in Al2O3 basic format. Specifications • Average Particle Size: 100 μm • Surface Area: 130 m2/g • Pore Volume: 0.3 mL/g • Pore Size: 8 nm • pH: 9.0 - 10.5（basic)
From $182.00
InertSep AL-N is packed with alumina (Al2O3). Available in Al2O3 neutral format. Specifications • Average Particle Size: 100 μm • Surface Area: 130 m2/g • Pore Volume: 0.3 mL/g • Pore Size: 8 nm • pH Range: 6.0 - 7.5 (neutral)
From $182.00
Florisil SPE cartridges are packed with magnesium silica, highly polar material which strongly adsorb polar compounds from none polar matrices and typically used for sample cleanup of organic extracts. Specifications • Average Particle Size: 50 - 200 µm • Surface Area: 230 m2/g • Pore Volume: 0.5 mL/g • Pore Size: 9 nm
From $155.00
InertSep FL-PR cartridges are packed with FL-PR, which is used for sample cleanup for analysis of residual pesticides in crops. This sorbent is also good at viscous sample and large volume sample to expedite the procedure. Specifications • Average Particle Size: 100 - 300 μm • Surface Area: 230 m2/g • Pore Volume: 0.5 mL/g • Pore...
From $155.00
InertSep CBA is a silica-based sorbent modified with carboxyl ethyl functional groups. The primary interactions of this sorbent are cation exchange and secondary interactions are week-polar and non-polar. This sorbent is suitable for extraction of drugs with strongly cationic amine groups. Specifications Average Particle Size: 45 μm Ca...
From $191.00
InertSep PRS is a silica-based sorbent modified with propyl-sulfonyl functional groups. The primary interactions of this sorbent are anion exchange and secondary interactions are slightly non-polar. Specifications Average Particle Size: 45 μm Carbon Load: 8.5 % Surface Area: 450 m2/g Pore Volume: 0.7 mL/g Pore Size: 6 nm Ion exchan...
From $200.00
InertSep SCX is a silica-based sorbent modified with benzene sulfonyl propyl functional groups. The primary interaction is a combination of both non-polar and strong cation exchange. Because the non-polar interactions on InertSep SCX is stronger than those of InertSep PRS, it is suitable for such an extraction that the combination of non-...
From $219.00
InertSep NH2 is a silica-based sorbent modified with an amino-propyl functional groups. Anion exchange and polar interaction are combined as a primary interactions. As secondary interactions, it has weak non-polar interactions. Similar to InertSep 2OH and InertSep SI used in normal phase mode, InertSep NH2 can be used for the separation o...
From $228.00
InertSep PSA is a silica-based sorbent modified with an ethylene-diamine-N-propyl functional groups. The primary interactions of this sorbent are anion exchange and secondary interactions are week non-polar. Specifications Average Particle Size: 60 µm Carbon Load: 11.5 % Surface Area: 450 m2/g Pore Volume: 0.7 mL/g Pore Size: 6 nm ...
From $228.00
InertSep SAX is a silica-based sorbent modified with tri-methyl amino propyl functional groups. Primary interactions are very strong anion exchange. Secondary interactions are non-polar exchange. It is generally used for the extraction of weak anions such as carboxylic acid. Specifications Average Particle Size: 45 μm Carbon Load: 7 % ...
From $228.00
InertSep PA is a special SPE modified with polyamide functional groups. Primary interactions are anion exchange and polar exchange. Secondary interactions are non-polar exchange.
From $300.00
InertSep C18-C FF is an arranged version of InertSep C18-C for applications that need high flow late. This sorbent is also good at viscous biological sample and large volume sample to expedite the procedure. Specifications • Average Particle Size: 120 µm • Carbon Loading: 16 % • End-Capping: Low • Surface Area: 450 m2/g • Pore V...
From $155.00
InertSep SI FF is an arranged version of InertSep SI for applications that need high flow late. This sorbent is also good at viscous sample and large volume sample to expedite the procedure. Specifications • Average Particle Size: 110 μm - 125 μm • Surface Area: 400 m2/g - 550 m2/g • Pore Volume: 0.60 mL/g - 0.80 mL/g • Pore Size...
From $164.00
InertSep NH2 FF is an arranged version of InertSep NH2 for applications that need high flow late. This sorbent is also good at viscous sample and large volume sample to expedite the procedure. Specifications Average Particle Size: 120 μm Carbon Load: 10 % Surface Area: 450 m2/g Pore Volume: 0.7 mL/g Pore Size: 6 nm Ion Exchange Cap...
From $200.00
InertSep C18 FF is an arranged version of InertSep C18 for applications that need high flow late. This sorbent is also good at viscous biological sample and large volume sample to expedite the procedure. Specifications Average Particle Size: 120 µm Carbon Loading: 19 % End-capping: High Surface Area: 450 m2/g Pore Volume: 0.7 mL/g ...
From $155.00
InertSep C18-B FF is an arranged version of InertSep C18-B for applications that need high flow late. This sorbent is also good at viscous biological sample and large volume sample to expedite the procedure. Specifications Average Particle Size: 120 µm Carbon Loading: 14 % End-Capping：Middle Surface Area: 450 m2/g Pore Volume: 0.7 mL/g Po...
InertSep MA-2 is a methacrylate polymer based sorbent modified with, which includes a weak anion exchange function group. Because polymer base gel occurs little secondary interaction, SPE by genuine anion exchange interaction can be achieved with this sorbent. Specifications Average Particle Size: 70 µm Surface Area: 250 m2/g Pore Volume:...
From $273.00
InertSep PLS-2 is a SDB (Styrene divinylbenzene) polymer based reversed phase mode sorbent. Compared to a silica based C18 sorbent, InertSep PLS-2 has a quite higher sorbent retentive capacity and better stability in pH range. Specifications Average Particle Size: 70 µm Surface Area: 700 m2/g Pore Volume: 1.1 mL/g Pore Size: 7 nm pH Range...
From $182.00