English
You have no items in your shopping cart.

Capillary GC Columns

Filters
per page
InertCap 5 is a low polarity GC column bonded with 5% diphenyl - 95% dimethylpolysiloxane. InertCap 5 is an optimal first choice column for a variety of general analyses such as pesticides and volatile compounds etc.
From $410.00
InertCap 5MS is a low polarity GC column bonded with 5% diphenyl - 95% dimethylpolysiloxane. Designed as a column for GC/MS, InertCap 5MS achieves very high inertness and extremely low bleeding.
From $473.00
InertCap 5MS/Sil is a low polarity GC column bonded with 5% diphenyl (equiv.) - 95% dimethylpolysilphenylene siloxane. Designed for GC/MS, InertCap 5MS/Sil achieves higher heat resistance and lower bleeding due to an arylene phase. In addition to our basic performance and quality inspection, each lot is inspected by using a pesticide mixt...
From $473.00
In the case of pesticide analysis, about half time can be reduced by using Fast GC columns. Use your currently GC system for a large number of samples, normally it needs a numbers of GC, GC/MS instruments, however, Fast GC columns can minimize the cost of installing additional system. No specific procedure such like high pressure injectio...
From $573.00
Guard columns and retention gaps are used widely in gas chromatography. Both of them are short (1-10 m) piece of uncoated deactivated fused silica tubing which are placed in-line between the GC injection port and the analytical capillary column. InertCap ProGuard is a"guard column built-in"analytical capillary column without the connec...
From $746.00
Transfer lines are widely used for connecting interface of GC chromatography and MS. InertCap T.L. is a"transfer line built-in"analytical capillary column without connectors. Transfer line prevents degradation of stationary phase and keeps it low bleed. Additionally, transfer line is inert to transfer samples with no adsorption. Therefore...
From $746.00
InertCap 1 is a non-polar column bonded with 100% dimethylpolysiloxane. Compounds elute in order of increasing boiling point. InertCap 1 finds use in a wide range of general analyses.
From $410.00
InertCap 1301 is a medium polarity column bonded with 6% cyanopropylphenyl and 94% dimethylpolysiloxane. Compared to InertCap 25, the polarity of InertCap 1301 is slightly lower. Cyano groups contained in the stationary phase offer unique selectivity.
From $410.00
InertCap 17 is a medium polar column bonded with 50% diphenyl - 50% dimethylpolysiloxane. It is stronger than InertCap 35, and it also shows high separation efficiency for general and pesticides analyses.
From $410.00
InertCap 1701 is a medium polarity column bonded with 14% cyanopropylphenyl and 86% dimethylpolysiloxane. It contains cyano groups as InertCap 1301. InertCap 1701 has a stronger polarity than InertCap 25 and is suitable for pesticides screening analyses.
From $410.00
Filters
Refine