Capillary GC Columns

InertCap 1701MS is a medium polarity column bonded with 14% cyanopropylphenyl and 86% dimethylpolysiloxane, and designed for GC/MS. Containing cyano groups as InertCap 1301, InertCap 1701MS has a stronger polarity than InertCap 25 making it suitable for pesticides screening analyses.

InertCap 17MS is a medium polarity column bonded with 50% diphenyl - 50% dimethylpolysiloxane and designed for GC/MS. InertCap 17MS achieves one of the world's highest inertness and lowest bleed, and is suitable for microanalyses such as pesticides analyses.

InertCap 1MS is a non-polar column bonded with 100% dimethylpolysiloxane. Samples elute in order of low boiling points. Designed for GC/MS, InertCap 1MS delivers high inertness and ultra low bleed.

InertCap 210 is a medium polarity column bonded with 50% trifluoropropyl and 50% methylpolysiloxane. It shows a unique selectivity for polar compounds, and due to the phosphorous nitrogen contained, InertCap 210 is suitable for the analysis of these kinds of compounds.

InertCap 225 is a medium polar column bonded with 50% cyanopropylmethyl and 50% phenylmethylpolysiloxane. The cyano group in the stationary phase includes a triple bond and retains compounds stronger according to the increase of the number of unsaturated bonds by their dipole/dipole interactions. For this reason, InertCap 225 shows high s...

InertCap 25 is a medium polarity column bonded with 25% diphenyl - 75% dimethylpolysiloxane. With different selectivities compared to other medium polarity columns, InertCap 25 is useful for identifying and quantifying different analytes.

InertCap 35 is a medium polarity column bonded with 35% diphenyl - 65% dimethylpolysiloxane. With a stronger polarity than InertCap 25, InertCap 35 also shows high separation efficiency for semi-volatile compounds and solvent analyses.

InertCap 624 is a medium polarity column bonded with 6% cyanopropylphenyl and 94% dimethylpolysiloxane and designed for VOC analysis.

InertCap 624MS is a medium polarity column bonded with 6% cyanopropylphenyl and 94% dimethylpolysiloxane. The structure is the same as InertCap 624, designed for low bleed, stable batch control and highest inertness.

InertCap CHIRAMIX has been designed to improve the separation of enantiomers coated with a mixture of cyclodextrin derivatives. Compared to the other commercially available columns which are coated with single cyclodextrin, InertCap CHIRAMIX can effectively separate a variety of enantiomers in a short time as the 1st choice column.